Best Wholesale Prices – Wood Cabinets For Kitchen Remodeling and Hardware

Interior decoration is a form of art more than a luxury. Anyone can have their interiors embellished in many ways irrespective of his budget size. Even rearranging the existing furniture, cabinets and showpieces can bring about a lot of difference. However, remodeling and renovations are a more serious form of interior makeover that aims at enhancing the aesthetic value as well as utility. And more than anywhere else, the need for remodeling arises in a kitchen. Kitchen is the most active spot in a home. And over time the furniture and fixtures undergo apparent wear and tear. Cabinet doors, hinges, drawers, handle and pulls, everything depreciates both in terms of look and durability. All these items require maintenance and replacements in order to keep the kitchen looking as new and appealing as your other rooms. This is the reason why, kitchen remolding or “refacing” is a highly discussed topic everywhere.

If you are looking for a low-budget remodeling, then you cannot possibly think of replacing the flooring or decorating your kitchen with all sorts of designer fittings and paintings. So, the only best option is to settle in with the replacement of obvious items like weathered cabinet doors or broken handles. Remodeling might include complete replacement of the old furniture but it can also be replacement of parts of furniture and refinishing it in such a way that it looks like a brand new item.

If you plan properly, you can save a lot of money on your kitchen remodeling and at the same time get a whole new look for your kitchen. Just by polishing or painting your cabin you can make it look entirely different. And also replace the pulls and handles with newer and stylish ones. Cabinet hardware is one of the most important items when it comes to kitchen remodeling. These small fittings can make an ordinary piece of wood look more expensive and impressive.

And now comes the most important part – the price. The general direction of the entire discussion above was emphasizing the importance of having a low-budget kitchen remodeling. So now that you know what all you need to have an efficient remodeling done, your next priority should be to get all the materials in bulk. You should make a list of all the items you need like new cabinets, hinges and hardware. Then start looking for wholesale traders dealing in cabinet furniture. You can find many of them in your vicinity through an online search, because nowadays, everybody who is anybody has an online address. You can look for used traditional hardware for your cabinets and even get unfinished cabinets at a much lower price. With a little effort you can upgrade them all and make them as good as new, or even better.

Learn Everything About Baby Furniture Features

Expecting mothers have a lot on their mind and one of their most pressing thoughts is…what type of baby furniture should I get for the nursery? The first challenge with nursery design is deciding what you need and figuring out where to get it. That’s easy to resolve, just ask your friends “with kids” what you need and make a list.

The next challenge is figuring out how to sort through the enormous selection of baby furniture available to choose the right nursery set for your home. To make this step easier, first figure out what style you want such as: traditional, eco-friendly, modern or boutique. Then do some brand research to find a manufacturer that makes that style of nursery furniture at prices that suit your budget. This will help to decrease your options, making your selection process much easier.

Next, find a company that sells that brand of baby furniture. Now comes the hard part, figuring out what’s best for baby and for your home d├ęcor. To do this, you’ll want to read up on each piece of furniture to see if it offers the features you want, including safety features, sturdy construction, non-toxic finishes plus attractive design. Since this is your first time reading about furniture made just for baby, such as cribs, changing tables, gliders etc… you’re bound to come across many terms that are a bit confusing such as: dovetail drawers, casters, mattress spring system and more.

Don’t worry, you’re about to become a pro at baby furniture terms, so you can find the ideal nursery furniture set for your precious sweetie. Below is a list of common, yet unusual baby furniture features and their definitions.


Types of Cribs

* Standard – A crib that’s regular size, typically measuring around Dimensions: 53″ H x 30″ W x 46.5″ L

* Convertible – A crib that can convert to bigger beds such as: Toddler Bed, Daybed, Twin or Full size bed.

* Portable – A crib that is foldable and can easily be set-up wherever needed.

* Mini – A crib that’s smaller than a standard size crib to save space in the nursery.

Crib Terms

* Casters and Locking Casters – Casters is another term for wheels. Many cribs with casters have lock mechanisms that allow you to lock two of the 4 wheels in place to keep the crib stationary.

* Conversion Rails (Rail Kit) – These are rails that allow you to convert your baby’s convertible crib into a bigger bed. If you purchase a convertible crib, I’d recommend getting the conversion rails or rail kit at the same time.

* Convertible – Refers to a crib that can be converted to bigger beds.

* Drape Rod or Canopy Rod – This is a rod that attaches to a crib that supports a fabric canopy or drape that will add beauty to the crib while also keeping light out of your baby’s eyes.

* Eco-friendly – Cribs that are eco-friendly are made of glues, stains and finishes that are 100% non-toxic and are low VOC. This term means that the crib materials are safer for baby and planet earth.

* Safety or Guard Rails – These are rails that you can attach to your child’s convertible crib when you transform it to a toddler bed. These rails are smaller and leave an opening so that baby can get in and out with ease, but they will protect your active child from falling out of bed.

* JPMA certified – JPMA refers to the Juvenile Product Manufacturer’s Association and if a piece of baby furniture is JPMA certified, then it’s been deemed baby-safe by this respected association.

* Metal Mattress Spring System – (otherwise known as Adjustable Mattress Support) This is an adjustable support that’s part of the board under the crib mattress that you can lower as your baby grows. It will lower the mattress to keep your ever-growing toddler safe from falls.

* Recessed Hardware – The term hardware refers to the screws and bolts used to hold the crib together and recessed means that the hardware is inset into the wood, so there’s no protruding hardware that can scratch baby or cause baby’s clothes or crib bedding to get caught.

* Slat Roll – A wooden slat platform that is placed under a mattress to ensure proper support and to provide ample air circulation for the mattress.

* Slats – This refers to a crib’s vertical rails. Slats shouldn’t be any further apart than 2 3/8 inches for baby safety.

* Static Sides/Rails – Static means stationary, not moving, so this refers to rails that don’t move.

* Sustainable Forests – This refers to forests where when trees are chopped down, seedlings are planted in their place to ensure that new trees grow on a constant basis. This is a managed system that ensures that there’s new tree constant life, as well as, safety precautions to ensure the safety of wildlife and the preservation of the natural environment.

* Trundle Drawer – This is a drawer on wheels that you’ll find beneath the crib.

Dressers and Changing Tables

* Cam Lock Construction – This refers to a reinforced hardware that adds extra stability to a piece of furniture.

* Dovetail Construction – This refers to furniture that has been made with dovetail joints that add extreme strength and durability to furniture and add beauty as well.

* Drawer Stop Mechanism – This refers to hardware that’s on a drawer that stops the drawer before it can be pulled off the track and out of position.

* Metal Drawer Glides – These are the guides on the bottom of drawers that make the drawers move in and out with ease.

* Metal Drawer Pulls – This is another term for drawer handles.

* Mouldings – This refers to the decorative pieces that are added to the dresser edges and drawer fronts.

* Rubberwood – This is an eco-friendly hardwood that has little tendency to warp or crack and when used in the making of baby furniture, it will ensure extreme durability.

* Tip Restraint Kit – This is a kit that offers two brackets, one that mounts on the wall in a stud and another that mounts onto the back of the dresser or changing table. These brackets are tethered with a tie to keep the furnishing in place at all times.

* Veneers – This refers to a decorative facing that’s added to the drawer fronts of dressers and changing tables to add beauty to the piece.

Determining the Best Type of Fastener to Use For Outdoor Furniture Construction

If you want to learn about selecting hardware for your next outdoor furniture project, then you’ll want to read this article. Specifically, I’ll be telling you about what type of hardware will perform best, why the type of metal used for fasteners and the finish used are important considerations, and how properly protecting or limiting exposure of your furniture to wet and winter conditions can increase life span. After you’re done with this article you will understand that the best choice of hardware for your outdoor furniture project is dependent on furniture style, material used for construction, selected location for the furniture and budget.

Selecting proper hardware for your furniture will help ensure a long life span, as well as improve the overall appearance of your furniture. Part of the problem is knowing what hardware to select when there are so many options available at the hardware store. The typical Lowes or Home Depot carries a huge selection of stainless steel, hot dipped galvanized, bright galvanized, plain steel, coated steel and brass bolts, nuts, washers and screws. Each type of fastener is suitable for certain applications, but not all are ideal for outdoor furniture applications.

In fact, choosing the wrong fasteners can greatly shorten the lifespan of your furniture, contribute to rot of wood furniture, cause unsightly staining, and even make your furniture unsafe to use.

One thing that needs to be noted right up front is, do not ever use unprotected steel fasteners for outdoor furniture, They will rust very quickly, and the steel will react with the tannic acid in the wood causing streaks and staining. The tannic acid actually speeds up the corrosion of the fasteners. Have you ever seen a wooden fence with black streaks running down the boards from the nails? This fence was installed with the wrong type of fasteners. The same thing will happen to your furniture. Even worse, as the fasteners rust, they will speed up the decay process of the wood around the rusted fasteners, ruining your furniture and making it potentially unsafe to use.

Hot Dipped Galvanized

Screws and bolts treated by hot dipped galvanizing are specifically designed for use outdoors. Electroplated galvanized or bright galvanized fasteners ultimately will not hold up as well as the hot dipped galvanized hardware. Zinc is used as a coating in both methods, and acts as a barrier against the elements and the tannic acids in the wood.

I strongly recommend only using screws or bolts in the construction of outdoor furniture, however. The galvanized finish on nails, either electroplated or hot dipped, can easily become damaged while hammering them in, exposing the nail head to the elements and allowing them to begin rusting quickly.

Adequate care must be taken when installing galvanized screws. Drill pilot holes in hardwoods, and be sure to use a bit that is not worn and susceptible to skipping in the screw head. For whatever reason, the galvanized screws seem to not be as well tempered as other steel fasteners, and are more likely to either snap off or have the heads strip out while installing them. Due to the allowance required for the hot dipped coating, galvanized bolts do not have as tight of tolerance on the threads, and are more likely to strip if over tightened.

Hot dipped galvanized fasteners are a fine choice for many outdoor furniture applications, including Adirondack Chairs, but are not the best choice for use in woods, such as teak.

Stainless steel

Stainless steel is the best choice for use in woods with higher levels of tannic acid, such as teak. Stainless steel is an alloy or blend of steel, nickel and chrome. The ratio of the other metals with the steel determine the weather and corrosion resistance of stainless steel. Because the steel is mixed with other softer metals, the stainless steel is not as strong, so predrilling of screw holes is highly recommended in all applications, and essential in hardwoods such as teak and mahogany. The added corrosion resistance more than outweighs any shortcomings that the metal may have, especially in outdoor furniture applications.

While stainless steel fasteners are the most rust resistant, they are also the most expensive of the options we are discussing. However, using stainless steel fasteners will add years of life to your furniture. In the respect, they are an investment that will pay out for years to come.


I have seen brass used in some commercially produced outdoor furniture, but do not recommend it. While brass does not form red rust, and is well suited for many wet applications such as toilets and sinks, it does tarnish and corrode. It is also very susceptible to the tannic acids in wood, which will cause it to fail more quickly. Brass screws in particular do not have sufficient strength for outdoor furniture applications.

Outdoor or deck screws

In the past several years a number of manufacturers have introduced outdoor fastening products specifically marketed for deck building. These will typically be green, gray, tan or brown. These screws are either ceramic or plastic coated to delay the metal reacting with the wood acids. The specific coating methods are proprietary to each manufacturer, and can be a combination of electroplated galvanizing and plastic, or a baked on ceramic.

I have used these fasteners in furniture applications and they perform just fine. Unfortunately, I have not come across bolts with this type of finish. The brand of screw I used was Deck Mate, and they were available in tan and brown, so that the color can be selected to better match the wood being used. These screws are ceramic coated, and the manufacturer provided a coated bit for installation, which was designed to not damage the ceramic coating at the screw head. If you choose this type of fastener, be sure to compare the cost with stainless steel, as the price will vary. If the stainless steel is reasonably comparable in cost, it would be the recommended fastener.

Always be sure to read the manufacturers specifications on the box to be sure that the screws are suitable for your application.

Other Considerations

If you are building furniture that will be located on a covered porch or patio where it will be protected from the elements, the concern will be the interaction between the wood and the fasteners, much more so than the weather. Furniture that will be exposed to the elements all year, such as a garden bench, or an Adirondack chair in the corner of your garden, will have to be constructed with much more care and concern to ensure that they hold up more than just one or two winters.

Additional considerations must be made beyond just the choice of what type of fastener to use, though this is very important. For example, fasteners should not be located where water where collect and sit on the fasteners for an extended period of time. The screws that attach the seat slats to an Adirondack chair are a prime example- typically these screws will be countersunk below the surface of the wood. This will allow water to collect in the screw holes, shortening the life span of all but stainless steel fasteners, and prolonging the exposure of the wood to water, which will increase the rate of decay. In applications where the furniture will be exposed to the elements year round the screw heads should be driven flush with the surface of the surrounding wood.

Construction and design of the furniture are also important considerations. Are the horizontal surfaces of the furniture constructed in such a way that will allow them to shed water, rather than collect it? Think of a picnic table with a slatted or board top. The gaps between the boards allow water a way to run off the top and not pool up.


Stainless steel is usually the best choice for outdoor furniture applications, though the cost may be prohibitive for some. There are other less expensive fastener options available that will perform acceptably. Do not use unprotected steel fasteners for outdoor furniture applications under any circumstances. Know where and how you intend to use your furniture and design it for the conditions it will be subjected to.

Architectural Hardware – Turn Flea Market Finds Into Jazzy Designs

Home decorating can be a challenge. It can also be very expensive and frustrating. When the concept of shabby chic decorating was born, thousands of people began exploring the idea of decorating their entire homes with flea market furniture. There can be great satisfaction in buying an inexpensive, unpopular furniture item and making it look decorative and appealing again. Even an old farmhouse can go from shabby to stylish by using smart, low-cost methods of decorating.

Decorate On The Cheap By Switching Out Hardware

Old flea market dressers and desks are great bargains. Some come with the wonderful patina of aged wood. Others may be warped, worn-out and in need of a little refurbishing to bring out their best qualities. Freshening up an old dresser or desk can mean a light sanding and a coat of paint. Old desks can make wonderful vanity tables for a woman’s bedroom when covered with fabric and given new accessories.

It is easy to change the look of an old desk by removing the legs and adding more decorative ones. Dresser drawers can take on a whole new look by simply removing the old-fashioned handles and adding some that have a more modern flair.

Cabinets Can Go From Frumpy To Fabulous

Many people love the idea of buying and living in an old farmhouse or cottage. Along with the rich history of owning old farmsteads and antique cottages may come the need for remodeling some of the interior space. Kitchens are typically the first rooms that many homeowners want to make more inviting and visually appealing.

Older farmhouses can have very out-of-date cabinet hardware. A fresh coat of paint and a change of cabinet hardware can completely change the kitchen from frumpy to fabulous without the huge expense of an entire remodel.

Transform Kid’s Rooms For Less

Old flea market furniture can really come to life in a child’s bedroom. A cheap dresser can be painted in bright, kid-pleasing colors and decorated with whimsical drawer knobs. A boy who loves sailing can have a dresser painted navy blue and white with fun sailboat-shaped hardware for drawer pulls. A little girl who loves flowers can have her flea market furniture painted pink and yellow with daisy-shaped drawer pulls for decorative charm.

Decorative Hardware Is Versatile

Antique furniture collectors and restorers also take advantage of the many different choices available when it comes to architectural hardware. Some want to restore an old piece back to its original appearance and will replace missing hardware with reproduction pieces. Others want to make a modern piece of furniture look older by adding hardware that has an aged, antique look. This pretend aging process is another dimension of the shabby chic style of home decorating.

Buying old flea market pieces and changing out a few hardware details does take some creativity and a slight bit of know-how when it comes to using a screwdriver, but it can be great fun. The best part about shopping for furniture at flea markets is the adventure of bargain hunting itself. Even architectural hardware can be found at flea markets making it easy to start putting together jazzy furniture designs at affordable prices.

The Best Place To Get A Cheap Furniture Dolly

Do you plan on moving sometime soon? Are you worried that your move is going to be rather difficult? Something that I highly recommend is that you get yourself a furniture dolly because they will make everything a lot easier which means that it will go by much faster as well. Just know that a furniture dolly will make everything go by a lot faster and that is why you need to get one. What I recommend is to get a cheap furniture dolly somewhere.

If you are wanting to save money then that is a smart thing to do because the cost of a dolly for moving furniture can sometimes cost quite a bit. What I would suggest is that you buy your dolly from one of these 3 places because they all offer great prices and high quality dollies.

Where To Get Cheap Dollies

Amazon – Amazon is the very first place that I would suggest looking for a dolly. Being that Amazon has a lot of different items for sale and they are all at great prices, I always look there no matter what I am buying. What most people don’t realize is that dollies are not really cheap when you buy them from bigger hardware stores and that is why buying from Amazon is a good idea.

eBay – eBay is another great website to buy things for at low prices. The reason why I highly recommend eBay is because some people will sell things just to clear out their garage. Getting a good dolly is not always easy but with all the sellers on eBay you are bound to find something. The only thing you need to understand is that eBay uses sellers so make sure that the seller you are buying from is reliable and trustworthy.

Small Hardware Stores – A local hardware store would be the last place I would look. What I like about buying things from a small hardware store is they are willing to give their customers a better price if they can. What most people don’t realize is that small stores have to offer better prices because if they don’t then people will probably go to another store for the exact same item.

Just know that you can get a great deal on a dolly for furniture too as long as you know what you are looking for and where to find it. As long as you know where to get a cheap furniture dolly then it will happen for you as well.